A.Maqbool, N.F.Lone, N.Z.Khan,
A.N.Siddiquee, D.L.Chen, Exceptional tensile
strength-ductility synergy in friction stir
processed Mg-Y-Nd-Zr alloy achieved through
bimodal grain size distribution, Materials
Science and Engineering A, 2025, 919,
Article number 147521.
G.H.Cao, H.Wang, C.Qiu,
F.S.Meng, Z.J.Deng, D.T.Zhang, D.L.Chen,
Quasi-in-situ observations of
microstructural evolution during cyclic
deformation of a Mg-Zn-Ca alloy, Vacuum,
2025, 231, Article number 113804.
L.Liu, H.Wang, D.T.Zhang,
C.Qiu, D.L.Chen, Enhancing
strength-ductility synergy in
heterostructured magnesium alloys by
tailoring heterogeneity levels, Materials
Science and Engineering A, 2025, 925,
Article number 147906.
N.Gangil, A.Mishra, N.F.Lone,
D.Bajaj, D.L.Chen, J.Haider, X.Z.Chen,
S.Konovalov, A.N.Siddiquee, Linear friction
welding of similar and dissimilar materials:
A review, Metals and Materials
International, 2025, 31, 1-21.
W.Malik, N.F.Lone, D.Bajaj,
M.H.Abidi, S.Chaudhary, M.K.Mohammed,
D.L.Chen, A.N.Siddiquee, Deformation induced
microstructure and texture evolution in
additively manufactured Ti-6Al-4V sheets via
friction stir welding, Materials Science
and Engineering A, 2025, 927, Article
number 148043.
Z.Xu, A.Q.He, Y.Q.Tang,
K.Y.Chen, G.J.Diao, M.Y.Wu, D.Fraser, J.Li,
R.Chung, R.R.Fang, A.Vorobyev, D.L.Chen,
D.Y.Li, Solid-particle erosion resistance of
NbC-reinforced AlCrFeNi medium-entropy alloy
at ambient and elevated temperatures, Wear,
accepted, 2025.
G.J.Diao, A.Q.He, D.Zhang,
Y.Q.Tang, Y.F.Zhou, Z.Xu, K.Y.Chen, A.Kumar,
S.E.Mousavi, M.Y.Wu, W.G.Chen, D.L. Chen,
D.Y.Li, Mechanical properties and wear
behaviors of lightweight Al3Ti-based
medium-entropy alloys at elevated
temperatures, Wear, accepted, 2025.
Q.H.Wang, X.Qin, S.X.Xia,
L.Wang, W.Q.Wang, W.Y.Huang, Y.Song,
W.N.Tang, D.L.Chen, Interpretable machine
learning excavates a low-alloyed magnesium
alloy with strength-ductility synergy based
on data augmentation and reconstruction, Journal
of Magnesium and Alloys, accepted,
2025.
S.S.Dash, R.C.Fernandes,
X.Shang, Y.Zou, H.Peng, X.Q.Jiang, X.F.Fang,
N.S.Ma, D.Y.Li, D.L.Chen, Fatigue and
deformation mechanisms of ultrasonic
spot-welded dissimilar joints of a magnesium
alloy to a clad aluminum alloy, Journal
of Magnesium and Alloys, accepted, 2025.
C.C.de Andrade Ferreira,
R.H.M.de Siqueira, J.G.Nuñez, F.E.Mariani,
R.T.Coelho, D.L.Chen, M.S.F.de Lima,
Microstructural characterization of
martensitic stainless-steel blades
manufactured by directed energy deposition
(DED), Metals, accepted, 2025.
Z.Y.Liu, S.S.Dash, J.H.Zhang,
T.Y.Lyu, L.Z.Lang, D.L.Chen, Y.Zou, Fatigue
crack growth behavior of an additively
manufactured titanium alloy: Effects of
spatial and crystallographic orientations of
α lamellae, International Journal of
Plasticity, 2024, 172, Article number
103819.
M.Y.Wu, R.K.Sim, A.Q.He,
G.J.Diao, D.L.Chen, D.Y.Li, Enhancing
mechanical performance and wear resistance
of Co‑free B2/A2 CrFeNiAl alloy via Cr and
Ti adjustment, MRS Bulletin, 2024,
49, 25-37 (selected as an Impact Article -
"the premier outlet for high-profile
original materials research").
N.F.Lone, D.Bajaj, N.Gangil,
M.H.Abidi, D.L.Chen, A.Arora, A.N.Siddiquee,
Implementing high entropy alloy synthesis
via friction stir processing: Simultaneous
solid-state alloying and ultra-refinement of
copper, Vacuum, 2024, 222, Article
number 113042.
A.N.Siddiquee, N.Z.Khan,
N.Gangil, D.Bajaj, S.M.A.K.Mohammed,
D.L.Chen, Autogenous dissimilar welding of
copper-to-stainless steel via electron beam
welding: A novel strategy for achieving
defect-free joints, Metallurgical and
Materials Transactions A, 2024, 55(2),
635-651.
M.Zhang, H.P.Xiang, L.Xu,
A.H.Feng, S.J.Qu, D.L.Chen, First-principles
investigation on the adsorption and
diffusion of oxygen at the B2(110)-O(001)
interface in Ti2AlNb alloys, Metals,
2024, 14(3), Article number 316.
K.Wang, H.P.Xiang, L.Xu,
A.H.Feng, S.J.Qu, H.Wang, D.L.Chen, The
effect of Nb doping on the properties of
Ti-Al intermetallic compounds using
first-principles calculations, Materials,
2024, 17(2), Article number 358.
H.Wang, S.L.Gao, B.T.Wang,
Y.T.Ma, Z.J.Guo, K.Zhang, Y.Yang, X.Z.Yue,
J.Hou, H.J.Huang, G.P.Xu, S.J.Li, A.H.Feng,
C.Y.Teng, A.J.Huang, L.C.Zhang, D.L.Chen,
Recent advances in machine learning-assisted
fatigue life prediction of additive
manufactured metallic materials: A review, Journal
of Materials Science and Technology,
2024, 198, 111-136.
H.Wang, X.C.Luo, D.T.Zhang,
C.Qiu, D.L.Chen, High-strength extruded
magnesium alloys: A critical review, Journal
of Materials Science and Technology,
2024, 199, 27-52.
Q.H.Wang, L.Wang, J.Z.Xu,
H.W.Zhai, Y.Chen, S.X.Xia, X.Qin, Y.F.Li,
B.Jiang, D.L.Chen, Extrusion limit diagram
of Mg-5Bi-3Al-1Zn alloy and effects of
extrusion parameters on its microstructures
and mechanical properties, Journal of
Materials Research and Technology,
2024, 29, 5166-5179.
N.F.Lone, N.Ali, M.H.Abidi,
D.Bajaj, T.Khan, D.L.Chen, A.Al-Ahmari,
A.N.Siddiquee, Strategy for double‑side
friction stir welding of thick Mg4Y3Gd alloy
joints, International Journal of
Advanced Manufacturing Technology,
2024, 131, 5305-5323.
Z.Xu, Y.Q.Tang, A.Q.He,
W.G.Chen, D.L.Chen, D.Y.Li, Opposite
Bauschinger effects on wear of high-entropy
alloy AlCoCrFeNix (x=0~2) under sliding wear
and machining conditions, Metallurgical
and Materials Transactions A, 2024,
55, 2098-2115.
N.F.Lone, F.Czerwinski,
D.L.Chen, Present challenges in development
of lightweight high entropy alloys: A
review, Applied Materials Today,
2024, 39, Article number 102296.
D.Bajaj, A.N.Siddiquee,
D.L.Chen, S.Konovalov, X.Chen, J.Haider,
M.Serier, Specifics of formability in recent
developments of tailor-welded blanks, National
Academy Science Letters, 2024, 47(4),
451-456.
H.Wang, D.T.Zhang, C.Qiu,
D.L.Chen, Static recrystallization kinetics
and texture evolution of a low-temperature
extruded Mg-Zn-Ca alloy during annealing, Transactions
of Nonferrous Metals Society of China,
accepted, 2024.
D.Bajaj, Z.Chen, S.J.Qu,
A.H.Feng, D.Y.Li, D.L.Chen, Distinct origins
of deformation twinning in an
additively-manufactured high-entropy alloy,
Additive Manufacturing, 2023, 74,
Article number 103716.
S.S.Dash, D.J.Li, X.Q.Zeng,
D.Y.Li, D.L.Chen, On the origin of
deformation mechanisms in a heterostructured
aluminum alloy via slip trace and lattice
rotation analyses, Materials Science and
Engineering A, 2023, 867, Article
number 144723.
S.S.Dash, D.J.Li, X.Q.Zeng,
D.Y.Li, D.L.Chen, Deformation behavior of a
newly-developed T4-treated Al-Si die cast
alloy, Materials Science and Engineering
A, 2023, 866, Article number 144283.
X.R.Guan, Q.Chen, S.J.Qu,
G.J.Cao, H.Wang, A.H.Feng, D.L.Chen,
Adiabatic shear instability in a titanium
alloy: Extreme deformation-induced phase
transformation, nanotwinning and grain
refinement, Journal of Materials Science
and Technology, 2023, 150, 104-113.
H.Peng, D.L.Chen, S.F.Guo,
H.Hong, K.H.Zheng, X.F.Bai, D.Y.Li,
X.Q.Jiang, Dissimilar ultrasonic spot
welding of rare-earth containing ZEK100
magnesium-to-aluminum alloy with a zinc
interlayer: Microstructural evolution and
mechanical properties, Journal of
Manufacturing Processes, 2023, 92,
422-434.
Y.Q.Tang, A.Kumar, D.L.Chen,
D.Y.Li, Q.Y.Li, W.Li, Bauschinger effect on
wear of cold-worked Cu and Mg - A study
combining molecular dynamics modeling and
experimental investigation, Wear,
2023, 522, Article number 204726.
A.Kumar, Y.Q.Tang, D.Y.Li,
D.L.Chen, W.Li, Q.Y.Li, Influence of
solution-hardening on the mechanical
properties and wear resistance of copper
alloys, Wear, 2023, 523, Article
number 204869.
S.E.Mousavi, A.Q.He, D.L.Chen,
D.Y.Li, Influences of alloying elements on
microstructure and tribological properties
of a medium-weight high-entropy alloy, Wear, 2023,
524-525, Article number 204856.
Z.Y.Liu, L.Z.Lang,
S.M.A.K.Mohammed, D.L.Chen, B.He, Y.Zou,
Small-depth nanoindentation studies of an
additively manufactured titanium alloy:
Anisotropic nanomechanical properties and
correlation with microscopic mechanical
behavior, Materialia, 2023, 30,
Article number 101802.
H.Wang, D.T.Zhang, C.Qiu,
W.W.Zhang, D.L.Chen, Achieving superior
strength-ductility synergy in a
heterostructured magnesium alloy via
low-temperature extrusion and
low-temperature annealing, Journal of
Materials Science and Technology,
2023, 163, 32-44.
A.H.Feng, Q.Chen, J.Wang,
H.Wang, S.J.Qu, D.L.Chen, Thermal stability
of microstructures in low-density
Ti2AlNb-based alloy hot rolled plate, Acta
Metallurgica Sinica, 2023, 59(6),
777-786.
G.J.Diao, A.Q.He, Y.Q.Tang,
M.Y.Wu, D.Zhang, W.G.Chen, D.L.Chen, D.Y.Li,
Effects of Al and Ti on microstructure,
mechanical properties and wear resistance of
TiXCrFe2Ni2 alloys, Materials Science
and Engineering A, 2023, 879, Article
number 145242.
X.R.Guan, Q.Chen, S.J.Qu,
G.J.Cao, H.Wang, X.D.Ran, A.H.Feng,
D.L.Chen, High-strain-rate deformation:
Stress-induced phase transformation and
nanostructures in a titanium alloy, International
Journal of Plasticity, 2023, 169,
Article number 103707.
S.S.Dash, Z.Y.Liu, Y.Zou,
D.J.Li, X.Q.Zeng, D.Y.Li, D.L.Chen,
Strengthening mechanisms and work hardening
in a heterostructured cast aluminum alloy
under compressive loading: Correlation with
nanomechanical properties, Journal of
Alloys and Compounds, 2023, 968,
Article number 171844.
M.Y.Wu,
R.K.Sim, A.Q.He,
G.J.Diao, D.L.Chen,
D.Y.Li, Mechanisms
underlying the
influence of Co
and Ti on the
microstructure,
mechanical and
wear properties of
A2/B2 typed
AlCrFeNi alloy, Journal
of Alloys and
Compounds,
2023, 968, Article
number 172070.
P.L.Niu,
W.Y.Li, C.G.Yang,
D.L.Chen, H.Peng,
Low cycle fatigue
properties of
friction stir welded
dissimilar 2024-T351
to 5083-H112
aluminum alloy
joints, The
Chinese Journal of
Nonferrous Metals,
2023, 33(7),
2137-2147.
M.A.Awotunde, B.J.Babalola,
P.A.Olubambi, D.L.Chen, Recrystallization
mechanisms during high-temperature XRD and
oxidation behavior of CNT-reinforced NiAl
composites, Corrosion Science, 2022,
204, Article number 110384.
Q.H.Wang, H.W.Zhai, L.T.Liu,
H.B.Xia, B.Jiang, J.Zhao, D.L.Chen, F.S.Pan,
Novel Mg-Bi-Mn wrought alloys: The effects
of extrusion temperature and Mn addition on
their microstructures and mechanical
properties, Journal of Magnesium and
Alloys, 2022, 10(9), 2588-2606.
H.M.Ji, X.W.Li, D.L.Chen, An
artful microstructure in nacre: Superior
resistance to fatigue deformation, International
Journal of Fatigue, 2022, 157, Article
number 106705.
P.L.Niu, W.Y.Li,
C.G.Yang, Y.H.Chen, D.L.Chen, Low cycle fatigue
properties of friction stir welded dissimilar
2024-to-7075 aluminum alloy joints, Materials
Science and Engineering A, 2022, 832,
Article number 142423.
X.N.Meng, D.T.Zhang,
W.W.Zhang, C.Qiu, D.L.Chen, Achieving high damping
capacity and strength simultaneously in a
high-zinc aluminum alloy via melt spinning and hot
extrusion, Materials Science and Engineering A,
2022, 833, Article number 142376.
S.S.Dash, D.J.Li,
X.Q.Zeng, D.Y.Li, D.L.Chen, Cyclic deformation
behavior and fatigue life prediction of an
automotive cast aluminum alloy: A new method of
determining intrinsic fatigue toughness, Fatigue
and Fracture of Engineering Materials and
Structures, 2022, 45, 725-738.
Z.D.Ma, G.Li, Q.Peng, X.D.Peng,
D.L.Chen, H.H.Zhang, Y.Yang, G.B.Wei,
W.D.Xie, Microstructural evolution and
enhanced mechanical properties of
Mg-Gd-Y-Zn-Zr alloy via centrifugal casting,
ring-rolling and aging, Journal of
Magnesium and Alloys, 2022, 10(1),
119-128.
S.M.A.K.Mohammed, D.L.Chen,
Z.Y.Liu, Q.Z.Wang, D.R.Ni, B.L.Xiao, Z.Y.Ma,
Cyclic deformation behavior and fatigue life
modeling of CNT-reinforced heterogeneous
aluminum-based nanocomposite, Materials
Science and Engineering A, 2022, 840,
Article number 142881.
C.Li, J.L.Sun, A.H.Feng,
H.Wang, X.Y.Zhang, C.Q.Zhang, F.Zhao,
G.J.Cao, S.J.Qu, D.L.Chen, Active slip mode
analysis of an additively manufactured
Ti-6Al-4V alloy via in-grain misorientation
axis distribution, Metals, 2022,
12(4), Article number 532.
M.A.Awotunde, P.A.Olubambi,
D.L.Chen, Compressive deformation behaviour
and toughening mechanisms of spark plasma
sintered NiAl-CNT composites, Ceramics
International, 2022, 48,
16072-16084.
X.C.Luo, H.L.Liu, L.M.Kang,
J.L.Lin, D.T.Zhang, D.Y.Li, D.L.Chen,
Achieving superior superplasticity in a
Mg-6Al-Zn plate via multi-pass submerged
friction stir processing, Acta
Metallurgica Sinica (English Letters),
2022, 35(5), 757-762.
J.F.Song, J.Chen, X.M.Xiong,
X.D.Peng, D.L.Chen, F.S.Pan, Research
advances of magnesium and magnesium alloys
worldwide in 2021, Journal of Magnesium
and Alloys, 2022, 10(4), 863-898.
Z.J.Yu, Z.Chen, D.D.Qu, S.J.Qu,
H.Wang, F.Zhao, C.Q.Zhang, A.H.Feng,
D.L.Chen, Microstructure and electrochemical
behavior of a 3D-printed Ti-6Al-4V alloy, Materials,
2022, 15(13), Article number 4473.
A.Q.He, Y.Q.Tang, M.Y.Wu,
D.L.Chen, D.Y. Li, A simple surface
treatment for Mg to gain enhanced resistance
to corrosion and corrosive wear by hammering
Al powder-covered Mg substrate, Advanced
Materials Interfaces, 2022, 9(17),
Article number 2200087.
R.K.Sim, Z.Xu, M.Y.Wu, A.Q.He,
D.L.Chen, D.Y.Li, Microstructure, mechanical
properties, corrosion and wear behavior of
high-entropy alloy AlCoCrFeNix (x>0) and
medium-entropy alloy (x=0), Journal of
Materials Science, 2022, 57,
11949-11968.
H.Wang, D.T.Zhang,
C.Qiu, W.W.Zhang, D.L.Chen,
Achieving superior mechanical
properties in a low-alloyed
magnesium alloy via low-temperature
extrusion, Materials Science and
Engineering A, 2022, 851,
Article number 143611.
Z.Y.Liu, R.K.Li,
D.L.Chen, Y.Sun, B.He, Y.Zou,
Enhanced tensile ductility of an
additively manufactured near-α
titanium alloy by microscale shear
banding, International Journal
of Plasticity, 2022, 157,
Article number 103387.
S.S.Dash, D.J.Li,
X.Q.Zeng, D.Y.Li, D.L.Chen,
Low-cycle fatigue behavior of
Silafont®-36 automotive aluminum
alloy: Effect of negative strain
ratio, Materials Science and
Engineering A, 2022, 852,
Article number 143701.
P.L.Niu,
W.Y.Li, Y.H.Chen, Q.P.Liu, D.L.Chen, Base
material location dependence of corrosion
response in friction-stir-welded dissimilar
2024-to-5083 aluminum alloy joints, Transactions
of Nonferrous Metals Society of China (English
Edition), 2022, 32, 2164-2176.
Y.L.Zhang, Z.Chen, S.J.Qu,
A.H.Feng, G.B.Mi, J.Shen, X.Huang, D.L.Chen,
Multiple α sub-variants and anisotropic
mechanical properties of an
additively-manufactured Ti-6Al-4V alloy, Journal
of Materials Science and Technology,
2021, 70, 113-124.
P.L.Niu, W.Y.Li, D.L.Chen,
Tensile and cyclic deformation response of
friction-stir-welded dissimilar aluminum
alloy joints: Strain localization effect, Journal
of Materials Science and Technology,
2021, 73, 91-100.
J.Chen, Q.Chen, S.J.Qu,
H.P.Xiang, C.Wang, J.B.Gao, A.H.Feng,
D.L.Chen, Oxidation mechanisms of an
intermetallic alloy at high temperatures, Scripta
Materialia, 2021, 199, Article number
113852.
S.S.Dash, D.J.Li, X.Q.Zeng,
D.L.Chen, Heterogeneous microstructure and
deformation behavior of an automotive grade
aluminum alloy, Journal of Alloys and
Compounds, 2021, 870, Article number
159413.
L.Yang, J.Q.Li, D.G.Wang,
Y.B.Guo, Q.Y.Li, W.Li, R.B.Xu, D.L.Chen,
D.Y.Li, Understand the large difference in
properties among coiled tubing steels having
similar microstructures via electron work
function analysis, Wear, 2021,
466-467, Article number 203585.
R.A.F.Mansur, V.Braga,
V.M.Mansur, D.L.Chen, M.S.F.Lima, Fiber
laser welding of hot-stamping steel: Effect
of in-situ annealing on the microstructure
and mechanical properties, Welding in
the World, 2021, 65, 57-65.
D.Bajaj, A.N.Siddiquee,
N.Z.Khan, A.K.Mukhopadhyay,
S.M.A.K.Mohammed, D.L.Chen, N.Gangil, Flow,
process forces and strains during friction
stir welding: A comprehensive first
principle approach, Proceedings of the
Institution of Mechanical Engineers, Part
B: Journal of Engineering Manufacture,
2021, 235(5), 912-924.
S.M.A.K.Mohammed, D.L.Chen,
Z.Y.Liu, D.R.Ni, Q.Z.Wang, B.L.Xiao, Z.Y.Ma,
Deformation behavior and strengthening
mechanisms in a CNT-reinforced
bimodal-grained aluminum matrix
nanocomposite, Materials Science and
Engineering A, 2021, 817, Article
number 141370.
Q.H.Wang, B.Jiang, D.L.Chen,
Z.Y.Jin, L.Y.Zhao, Q.S.Yang, G.S.Huang,
F.S.Pan, Strategies for enhancing the
room-temperature stretch formability of
magnesium alloy sheets: A review, Journal
of Materials Science, 2021, 56,
12965-12998.
M.Awotunde, P.Olubambi,
D.L.Chen, Influence of process parameters on
the sintering behaviour and densification of
NiAl intermetallics fabricated by spark
plasma sintering, Materials Today:
Proceedings, 2021, 38, 1159-1163.
C.C.Ye, H.Q.Ru, C.P.Zhang,
W.Wang, D.L.Chen, Fracture toughness of
Si3N4 ceramic composites: Effect of texture,
Journal of the European Ceramic Society,
2021, 41(13), 6346-6355.
Z.Xu, D.Y.Li, D.L.Chen, Effect
of Ti on the wear behavior of AlCoCrFeNi
high-entropy alloy during unidirectional and
bi-directional sliding wear processes, Wear,
2021, 476, Article number 203650.
P.L.Niu, W.Y.Li, Y.H.Chen,
F.C.Liu, J.Gong, D.L.Chen, Cyclic hardening
behavior and deformation mechanisms of
friction-stir-welded dissimilar
AA5083-to-AA2024 joints with heterogeneous
microstructures, Materials
Characterization, 2021, 181, Article
number 111465.
V.Braga, R.H.M.Siqueira,
I.Atilio, R.Mansur, D.Vieira, D.L.Chen,
M.S.F.Lima, Microstructural and mechanical
aspects of laser metal deposited H13 powder
for die repair, Materials Today
Communications, 2021, 29, Article
number 102945.
R.F.Hou, M.Y.Wu, Q.Y.Li,
W.Li, D.L.Chen, D.Y.Li, Effects of Mo
and B additives on hardness and the
resistance of Cu-Ni alloy to wear,
corrosion and corrosive wear, Metals
and Materials International,
2021, 27(12), 4911-4921.
S.M.A.K.Mohammed, Z.Y.Ma,
D.L.Chen, Bimodal-grained metal matrix
nanocomposites: A new class of
advanced materials with superior
mechanical properties (An invited
feature article), CSME Bulletin,
Spring 2021, Canadian Society for
Mechanical Engineering (CSME), June
2021, pp.15-16.
H.M.Ji, S.M.Liang, X.W.Li,
D.L.Chen, Kinking and cracking behavior in
nacre under stepwise compressive loading, Materials
Science and Engineering C, 2020, 108,
Article number 110364.
Y.L.Zhang, Z.Chen, S.J.Qu,
A.H.Feng, G.B.Mi, J.Shen, X.Huang, D.L.Chen,
Microstructure and cyclic deformation
behavior of a 3D-printed Ti-6Al-4V alloy, Journal
of Alloys and Compounds, 2020, 825,
Article number 153971.
Y.L.Zhang, A.H.Feng, S.J.Qu,
J.Shen, D.L.Chen, Microstructure and low
cycle fatigue of a Ti2AlNb-based lightweight
alloy, Journal of Materials Science and
Technology, 2020, 44, 140-147.
C.C.Ye, H.Q.Ru, Z.B.Qin,
S.W.Zhao, H.S.Jia, D.L.Chen, Silicon nitride
composites with magnesia and alumina
additives: Toughening mechanisms and
mechanical properties, Materials Science
and Engineering A, 2020, 779, Article
number 139140.
P.Q.Wang, D.L.Chen,
Y.Ran, Y.Q.Yan, X.W.She, H.Peng, X.Q.Jiang,
Electromagnetic pulse welding of Al/Cu dissimilar
materials: Microstructure and tensile properties,
Materials Science and Engineering A, 2020,
792, Article number 139842.
H.M.Ji, W.Yang, D.L.Chen, X.W.Li, Natural
arrangement of fiber-like aragonites and its
impact on mechanical behavior of mollusk shells: A
review, Journal of the Mechanical Behavior of
Biomedical Materials, 2020, 110, Article
number 103940.
S.M.A.K.Mohammed,
Y.D.Jaya, A.Albedah, X.Q.Jiang, D.Y.Li, D.L.Chen,
Ultrasonic spot welding of a clad 7075 aluminum
alloy: Strength and fatigue life, International
Journal of Fatigue, 2020, 141, Article
number 105869.
X.C.Luo, L.M.Kang,
H.L.Liu, Z.J.Li, Y.F.Liu, D.T.Zhang, D.L.Chen,
Enhancing mechanical properties of AZ61 magnesium
alloy via friction stir processing: Effect of
processing parameters, Materials Science and
Engineering A, 2020, 797, Article number
139945.
B.Y.Hu, H.Zhang,
L.Y.Liu, D.B.Liu, A.H.Feng, D.L.Chen, Effect of
microstructure evolution on corrosion behaviour of
friction stir welded joint for 2195-T8 alloy, Corrosion,
2020, 76(12), 1099-1108.
H.M.Ji, X.W.Li, D.L.Chen, Crack
initiation and growth in a special
quasi-sandwich crossed-lamellar structure in
cymbiola nobilis seashell, Journal of
the Mechanical Behavior of Biomedical
Materials, 2019, 90, 104-112.
H.Peng, D.L.Chen, X.F.Bai, X.W.She,
D.Y.Li, X.Q.Jiang, Ultrasonic spot welding of
magnesium-to-aluminum alloys with a copper
interlayer: Microstructural evolution and
tensile properties, Journal of Manufacturing
Processes, 2019, 37, 91-100.
P.L.Niu, W.Y.Li, A.Vairis,
D.L.Chen, Cyclic deformation behavior of
friction-stir-welded dissimilar AA5083-to-AA2024
joints: Effect of microstructure and loading
history, Materials Science and Engineering A,
2019, 744, 145-153.
S.M.A.K.Mohammed, D.J.Li, X.Q.Zeng,
D.L.Chen, Cyclic deformation behavior of a high
zinc-containing cast magnesium alloy, International
Journal of Fatigue, 2019, 125, 1-10.
V.K.Patel, S.D.Bhole, D.L.Chen,
D.R.Ni, B.L.Xiao, Z.Y.Ma, Ultrasonic spot
welding of dissimilar 2024Al alloy and
SiCp/2009Al composite, Journal of Materials:
Design and Applications, 2019, 233(3),
531-538.
X.C.Luo, D.T.Zhang, G.H.Cao, C.Qiu,
D.L.Chen, Multi-pass submerged friction stir
processing of AZ61 magnesium alloy:
Strengthening mechanisms and fracture behavior,
Journal of Materials Science, 2019, 54,
8640-8654.
S.M.A.K.Mohammed, S.S.Dash,
X.Q.Jiang, D.Y.Li, D.L.Chen, Ultrasonic spot
welding of 5182 aluminum alloy: Evolution of
microstructure and mechanical properties, Materials
Science and Engineering A, 2019, 756,
417-429.
X.C.Luo, D.T.Zhang, G.H.Cao, C.Qiu,
D.L.Chen, High-temperature tensile behavior of
AZ61 magnesium plate prepared by multi-pass
friction stir processing, Materials Science
and Engineering A, 2019, 759, 234-240.
G.D.Wu, G.R.Cui, S.J.Qu, A.H.Feng,
G.J.Cao, B.H.Ge, H.P.Xiang, J.Shen, D.L.Chen,
High-temperature oxidation mechanisms of
nano-/submicro-scale lamellar structures in an
intermetallic alloy, Scripta Materialia,
2019, 171, 102-107.
K.N.Zhao, D.X.Xu, H.X.Li,
J.S.Zhang, D.L.Chen, Microstructure and
mechanical properties of Mg/Mg bimetal
composites fabricated by hot-pressing diffusion
and co-extrusion, Materials Science and
Engineering A, 2019, 764, Article number
138194.
S.M.A.K.Mohammed, D.J.Li, X.Q.Zeng,
D.L.Chen, Low-cycle fatigue behavior of a newly
developed cast aluminum alloy for automotive
applications, Fatigue and Fracture of
Engineering Materials and Structures,
2019, 42, 1912-1926.
L.Q.Guo, L.Li, Q.Y.Li, W.Li,
D.L.Chen, D.Y.Li, In situ AFM analysis of
surface electron behaviors of strain-free and
deformed ferrite and austenite in duplex steel
and their correlation with electron work
function, Physica Status Solidi A,
2019, 216, 1800933. DOI: 10.1002/pssa.20180093.
A.H.M.A.Rahman, D.Y.Li, R.Xu,
D.L.Chen, Q.Y.Li, W.Li, Nonlinearity of material
loss versus the wearing force, JOM,
2019, 71(12), 4274-4283.
S.J.Qu, S.Q.Tang,
A.H.Feng, C.Feng, J.Shen, D.L.Chen, Microstructural
evolution and high-temperature oxidation
mechanisms of a titanium aluminide based alloy,
Acta
Materialia, 2018, 148, 300-310.
A.Hadadzadeh,
F.Mokdad, M.A.Wells, D.L.Chen, A new grain
orientation spread approach to analyze the
dynamic recrystallization behavior of a
cast-homogenized Mg-Zn-Zr alloy using electron
backscattered diffraction, Materials Science
and Engineering A, 2018, 709,
285-289.
H.M.Ji, S.M.Liang, X.W.Li,
D.L.Chen, A self-assembled smart architecture
against drilling predation in a Pinctada
maxima shell: Protective mechanisms, Journal
of Materials Science, 2018, 53,
3417-3426.
F.Mokdad,
D.L.Chen, D.Y.Li, Twin-twin interactions and
contraction twin formation in an extruded
magnesium alloy subjected to an alteration of
compressive direction, Journal of Alloys and
Compounds,
2018, 737, 549-560.
A.Hadadzadeh, F.Mokdad, M.A.Wells,
D.L.Chen, Modeling dynamic recrystallization
during hot deformation of a cast-homogenized
Mg-Zn-Zr alloy, Materials Science and Engineering A,
2018, 720, 180-188.
P.Wanjara, B.S.Naik, Q.Yang, X.Cao,
J.Gholipour, D.L.Chen, Linear friction welding
of dissimilar materials 316L stainless steel to
zircaloy-4, Metallurgical and
Materials Transactions A, 2018, 49(5), 1641-1652.
A.Hadadzadeh, F.Mokdad,
B.S.Amirkhiz, M.A.Wells, B.Williams, D.L.Chen,
Bimodal grain microstructure development during
hot compression of a cast-homogenized Mg-Zn-Zr
alloy, Materials
Science and Engineering A, 2018,
724, 421-430.
X.C.Luo, D.T.Zhang, W.W.Zhang,
C.Qiu, D.L.Chen, Tensile properties of AZ61
magnesium alloy produced by multi-pass friction
stir processing: Effect of sample orientation, Materials
Science and Engineering A, 2018, 725, 398-405.
H.M.Ji, X.W.Li, D.L.Chen, Deformation and fracture behavior
of a natural shell ceramic: Coupled effects of
shell shape and microstructure, Materials Science and
Engineering C,
2018, 90, 557-567.
C.K.Yan, A.H.Feng, S.J.Qu, G.J.Cao,
J.L.Sun, J.Shen, D.L.Chen, Dynamic
recrystallization of titanium: Effect of
pre-activated twinning at cryogenic temperature,
Acta
Materialia, 2018, 154, 311-324.
N.Tahreen, D.F.Zhang, F.S.Pan,
X.Q.Jiang, D.Y.Li, D.L.Chen, Strengthening
mechanisms in magnesium alloys containing
ternary I, W and LPSO phases, Journal of
Materials Science and Technology, 2018,
34(7), 1110-1118.
S.L.Zhang, Z.Chen, S.J.Qu,
A.H.Feng, X.Lu, J.Shen, D.L.Chen, Influence of
heat treatment on microstructure and mechanical
properties of Ti-6Al-4V alloy fabricated via
electron beam selective melting, Hot Working
Technology, 2018, 47(10), 226-231.
Z.Y.Ma, A.H.Feng, D.L.Chen, J.Shen,
Recent advances in friction stir
welding/processing of aluminum alloys:
Microstructural evolution and mechanical
properties, Critical Reviews in Solid
State and Materials Sciences,
2018, 43(4), 269-333.
M.H.Razmpoosh, A.Macwan, E.Biro,
D.L.Chen, Y.Peng, F.Goodwin, Y.N.Zhou, Liquid
metal embrittlement in laser beam welding of
Zn-coated 22MnB5 steel, Materials
and Design, 2018, 155, 375-383.
P.L.Niu, W.Y.Li, D.L.Chen, Strain
hardening behavior and mechanisms of friction
stir welded dissimilar joints of aluminum
alloys, Materials
Letters, 2018,
231, 68-71.
V.Kumar, L.Li, H.L.Gui, X.G.Wang,
Q.X.Huang, Q.Y.Li, F.Mokdad, D.L.Chen, D.Y.Li,
Tribological properties of AZ31 alloy
pre-deformed at low and high strain rates via
the work function, Wear,
2018, 414-415, 126-135.
M.H.Razmpoosh, E.Biro, D.L.Chen,
F.Goodwin, Y.Zhou, Liquid metal embrittlement in
laser lap joining of TWIP and medium-manganese
TRIP steel: The role of stress and grain
boundaries, Materials
Characterization, 2018, 145, 627-633.
H.Peng, X.Q.Jiang, D.L.Chen,
Ultrasonic spot welding of an aluminum alloy for
automotive applications, Materials Science
Forum, 2018, 941, 735-740.
A.Macwan, A.Kumar, D.L.Chen,
Ultrasonic spot welded 6111-T4 aluminum alloy to
galvanized high-strength low-alloy steel:
Microstructure and mechanical properties, Materials
and Design, 2017, 113, 284-296.
F.Mokdad, D.L.Chen, D.Y.Li, Single and double twin nucleation,
growth, and interaction in an extruded magnesium
alloy,Materials
and Design, 2017, 119, 376-396.
A.Macwan,
F.A.Mirza, S.D.Bhole, D.L.Chen, Similar and
dissimilar ultrasonic spot welding of 5754
aluminum alloy for automotive applications, Materials
Science Forum, 2017, 877, 561-568.
S.K.Shaha, F.Czerwinski, W.Kasprzak, J.Friedman, D.L.Chen,
Ageing characteristics and high-temperature tensile properties of Al-Si-Cu-Mg alloys
with micro-additions of Mo and Mn, Materials
Science and Engineering A, 2017, 684,
726-736.
S.Q.Wang, T.J.Ma, G.D.Wen, W.Y.Li,
D.L.Chen, Microstructure and fatigue properties
of linear friction welded TC4 titanium alloy
joints, Science
and Technology of Welding and Joining,
2017, 22(3),
177-181.
F.A.Mirza, A.Macwan, S.D.Bhole, D.L.Chen,
X.G.Chen, Microstructure,
tensile and fatigue properties of ultrasonic
spot welded aluminum to galvanized
high-strength-low-alloy and low-carbon steel
sheets,
Materials
Science and Engineering A, 2017, 690,
323-336.
Q.L.Cui, D.Parkes, D.Westerbaan,
S.S.Nayak, Y.Zhou, D.Saha, D.Liu, F.Goodwin,
S.Bhole, D.L.Chen, Tensile and fatigue
properties of single and multiple dissimilar
welded joints of DP980 and HSLA, Journal of
Materials Engineering and Performance, 2017, 26(2), 783-791.
S.K.Shaha, F.Czerwinski,
W.Kasprzak, J.Friedman, D.L.Chen, B.Shalchi-Amirkhiz,Interaction between
nano-precipitates and dislocations during high
temperature deformation of Al-Si alloys, Journal of Alloys and Compounds,
2017, 712, 219-224.
H.M.Ji, X.W.Li, D.L.Chen,
Crystallographic texture of crossed-lamellar
structure in Cymbiola nobilis shell, Journal of
the Ceramic Society of Japan, 2017, 125(5), 419-422.
F.Mokdad,
D.L.Chen, Z.Y.Liu, D.R.Ni, B.L.Xiao, Z.Y.Ma, Hot
deformation and activation energy of a
CNT-reinforced aluminum matrix nanocomposite, Materials
Science and Engineering A, 2017, 695, 322-331.
Z.X.Zhang, S.J.Qu, A.H.Feng,
J.Shen, D.L.Chen, Hot deformation behavior of
Ti-6Al-4V alloy: Effect of initial
microstructure, Journal of
Alloys and Compounds, 2017, 718, 170-181.
S.Q.Wang, W.Y.Li, K.Jing,
X.Y.Zhang, D.L.Chen, Microstructural evolution
and mechanical properties of electron beam
welded dissimilar titanium alloy joints, Materials
Science and Engineering A, 2017, 697,
224-232.
X.W.Li, H.M.Ji, W.Yang, G.P.Zhang,
D.L.Chen, Mechanical properties of
crossed-lamellar structures in biological
shells: A review, Journal of
the Mechanical Behavior of Biomedical
Materials, 2017, 74, 54-71 (An invited review article).
F.Mokdad, D.L.Chen, Z.Y.Liu,
D.R.Ni, B.L.Xia, Z.Y.Ma, Three-dimensional
processing maps and microstructural evolution of
a CNT-reinforced Al-Cu-Mg nanocomposite, Materials
Science and Engineering A, 2017, 702,
425-437.
F.Mokdad,
D.L.Chen, Z.Y.Liu, B.L.Xiao, D.R.Ni, Z.Y.Ma,
Deformation and strengthening mechanisms of a
carbon nanotube reinforced aluminum composite, Carbon,
2016,
104, 64-77.
S.Q.Wang, W.Y.Li, Y.Zhou, X.Li,
D.L.Chen, Tensile and fatigue behavior of
electron beam welded dissimilar joints of
Ti-6Al-4V and IMI834 titanium alloys, Materials
Science and Engineering A, 2016,
649, 146-152.
Q.L.Cui, D.Parkes, D.Westerbaan,
S.S.Nayak, Y.Zhou, D.Liu, F.Goodwin, S.Bhole,
D.L.Chen, Effect of coating on
fiber laser welded joints of DP980 steels, Material
and Design, 2016,
90, 516-523.
S.K.Shaha, F.Czerwinski,
W.Kasprzak, J.Friedman, D.L.Chen, Ageing
characteristics and high-temperature tensile
properties of Al-Si-Cu-Mg alloys with
micro-additions of Cr, Ti, V and Zr,
Materials
Science and Engineering A, 2016,
652, 353-364.
X.J.Zhao, L.Guo, Z.Y.Cai, L.R.Xiao,
Z.W.Zhao, G.Li, J.Han, H.Q.Ru, N.Zhang,
D.L.Chen, SiC and ZrN nano-particulate
reinforced AlON composites: preparation,
mechanical properties and toughening mechanisms,
Ceramics
International, 2016, 42(5), 6072-6079.
S.K.Shaha,
F.Czerwinski, W.Kasprzak, J.Friedman, D.L.Chen,
Effect of Mn and heat treatment on improvements in static
strength and low-cycle fatigue life of an
Al-Si-Cu-Mg alloy, Materials
Science and Engineering A, 2016, 657, 441-452.
A.Macwan, D.L.Chen, Ultrasonic spot welding of a rare-earth
containing ZEK100 magnesium alloy: Effect of
welding energy, Metallurgical and Materials
Transactions A, 2016, 47(4), 1686-1697.
F.Czerwinski, W.Kasprzak, D.Sediako,
D.Emadi, S.K.Shaha, J.Friedman, D.L.Chen,
High-temperature aluminum alloys for automotive
powertrains, Advanced
Materials and Processes, 2016, 174(3),
16-20.
F.A.Mirza,
K.Wang, S.D.Bhole, J.Friedman, D.L.Chen, D.R.Ni,
B.L.Xiao, Z.Y.Ma, Strain-controlled low cycle
fatigue properties of a rare-earth containing
ME20 magnesium alloy, Materials
Science and Engineering A, 2016,
661, 115-125.
F.A.Mirza, A.Macwan, S.D.Bhole,
and D.L.Chen, Microstructure
and fatigue properties of ultrasonic spot
welded joints of aluminum 5754 alloy,
JOM,
2016,
68(5), 1465-1475.
S.K.Shaha, F.Czerwinski,
W.Kasprzak, J.Friedman, D.L.Chen, Effect of transition metals on
energy absorption during strain-controlled
fatigue of an aluminum alloy, International Journal of Fatigue, 2016,
87, 456-470.
S.K.Shaha, F.Czerwinski,
W.Kasprzak, J.Friedman, D.L.Chen, Effect
of Cr, Ti, V and Zr micro-additions on
microstructure and mechanical properties of
the Al-Si-Cu-Mg cast alloy,
Metallurgical
and Materials Transactions A,
2016,
47(5), 2396-2409.
A.Macwan,
D.L.Chen, Ultrasonic spot welding of
rare-earth containing ZEK100 magnesium alloy
to 5754 aluminum alloy, Materials
Science and Engineering A, 2016,
666, 139-148.
F.A.Mirza, A.Macwan, S.D.Bhole,
D.L.Chen, X.G.Chen, Effect
of welding energy on microstructure and
strength of ultrasonic spot welded
dissimilar joints of aluminum to steel
sheets, Materials Science and
Engineering A,
2016,
668, 73-85.
M.Nouri, Z.R.Liu, D.Y.Li, X.G.Yan,
N.Tahreen, D.L.Chen, The role of minor yttrium
in tailoring the failure resistance of surface
oxide film formed on Mg alloy, Thin Solid
Films, 2016,
615, 29-37.
N.Tahreen, D.F.Zhang, F.S.Pan,
X.Q.Jiang, D.Y.Li, D.L.Chen, Texture evolution
and deformation activity of an extruded
magnesium alloy: Effect of yttrium and
deformation temperature, Journal
of Alloys and Compounds, 2016,
688, 270-284.
V.K.Patel, S.D.Bhole,
D.L.Chen, D.R.Ni, B.L.Xiao, Z.Y.Ma, Solid-state
ultrasonic spot welding of SiCp/2009Al composite
sheets, Materials and
Design, 2015, 65,
489-495.
N.Tahreen,
D.L.Chen, M.Nouri, D.Y.Li, Influence of aluminum
content on twinning and texture development of
cast Mg-Al-Zn alloy during compression, Journal of Alloys and Compounds, 2015, 623,
15-23.
S.K.Shaha,
F.Czerwinski, D.L.Chen, W.Kasprzak, Dislocation
slip distance during compression of Al-Si-Cu-Mg
alloy with additions of Ti-Zr-V, Materials
Science and Technology, 2015, 31(1),
63-72.
S.K.Shaha,
F.Czerwinski, W.Kasprzak, J.Friedman, D.L.Chen,
Monotonic and cyclic deformation behavior of the
Al-Si-Cu-Mg cast alloy modified with
micro-additions of Ti, V and Zr, International
Journal of Fatigue, 2015, 70,
383-394.
M.J.Luk,
F.A.Mirza, D.L.Chen, D.R.Ni, B.L.Xiao, Z.Y.Ma,
Low cycle fatigue of SiCp reinforced AA2009
composites,Materials and
Design, 2015, 66,
274-283.
F.Mokdad,
D.L.Chen, Strain-controlled low cycle fatigue
properties of a rare-earth containing ZEK100
magnesium alloy,Materials and
Design, 2015, 67,
436-447.
F.A.Mirza,
D.L.Chen, D.J.Li, X.Q.Zeng, Cyclic deformation
behavior of a rare-earth containing extruded
magnesium alloy: Effect of heat treatment, Metallurgical and Materials
Transactions A, 2015, 46(3), 1168-1187.
D.Sarker,
J.Friedman, D.L.Chen, De-twinning and texture
change in an extruded AM30 magnesium alloy
during compression along normal direction, Journal of
Materials Science and Technology, 2015,
31, 264-268.
W.Kasprzak,
F.Czerwinski, M.Niewczas, D.L.Chen, Correlating
hardness retention and phase transformations of
Al and Mg cast alloys for aerospace
applications, Journal of Materials
Engineering and Performance, 2015, 24,
1365-1378.
S.K.Shaha,
F.Czerwinski, W.Kasprzak, J.Friedman, D.L.Chen,
Effect of strain level on the behavior of
intermetallics and texture of Al-Si-Cu-Mg alloy
modified with transition metals, SAE
International Journal of Materials and
Manufacturing, 2015, 8(3), 731-735.
W.F.Xu, J.H.Liu,
D.L.Chen, Study on nonhomogeneity of low-cycle
fatigue properties along thickness direction of
plate for friction stir welded aluminum alloy
joint, Acta
Metallurgica Sinica, 2015, 51(5),
587-596.
S.Q.Wang,
V.Patel, S.D.Bhole, G.D.Wen, D.L.Chen, Microstructure
and mechanical properties of ultrasonic spot
welded Al/Ti alloy joints, Materials and
Design, 2015, 78,
33-41.
S.K.Shaha,
F.Czerwinski, W.Kasprzak, J.Friedman, D.L.Chen,
Effect of solidification rate and loading mode
on deformation behavior of cast Al-Si-Cu-Mg
alloy with additions of transition metals, Materials
Science and Engineering A, 2015, 636,
361-372.
A.Macwan, M.Marr, O.Kesler,
D.L.Chen, Microstructure, hardness, and fracture
toughness of suspension plasma sprayed
yttria-stabilized zirconia electrolytes on
stainless steel substrates, Thin
Solid Films, 2015, 584,
23-28.
W.P.Jia, X.D.Hu, H.Y.Zhao, D.Y.Ju,
D.L.Chen, Texture evolution of AZ31 magnesium
alloy sheets during warm rolling, Journal
of Alloys and Compounds, 2015, 645,
70-77.
N.Tahreen, D.F.Zhang, F.S.Pan,
X.Q.Jiang, C.Li, D.Y.Li, D.L.Chen,
Characterization of hot deformation behavior of
an extruded Mg-Zn-Mn-Y alloy containing LPSO
phase, Journal of Alloys and
Compounds, 2015, 644,
814-823.
S.K.Shaha, F.Czerwinski,
W.Kasprzak, J.Friedman, D.L.Chen, Improving
high-temperature tensile and low-cycle fatigue
behavior of Al-Si-Cu-Mg alloys through
micro-additions of Ti, V and Zr, Metallurgical and Materials
Transactions A, 2015, 46A,
3063-3078.
F.Mokdad, D.L.Chen, Cyclic
deformation and anelastic behavior of ZEK100
magnesium alloy: Effect of strain ratio, Materials
Science and Engineering A, 2015, 640,
243-258.
F.Czerwinski,
S.K.Shaha, W.Kasprzak, J. Friedman, D.L.Chen,
Thermal stability of Al-Si-Cu-Mg cast alloys
modified with transition metals Zr, V and Ti, Materials Science Forum, 2015, 828-829, 29-34.
S.K.Shaha, F.Czerwinski,
W.Kasprzak, J.Friedman, D.L.Chen, Microstructure
and mechanical properties of Al-Si
cast alloy with additions of Zr-V-Ti, Materials and Design, 2015, 83,
801-812.
A.Macwan, D.L.Chen, Microstructure
and mechanical properties of ultrasonic spot
welded copper-to-magnesium alloy
joints, Materials
and Design, 2015, 84,
261-269.
A.Macwan, X.Q.Jiang, D.L.Chen,
Interfacial characterization of dissimilar
joints between Al/Mg/Al tri-layered clad sheet
to high-strength low-alloy steel, JOM, 2015,
67(7), 1468-1477.
B.S.Naik, X.Cao, P.Wanjara,
J.Friedman, D.L.Chen, Residual stresses and
tensile properties of friction
stir welded AZ31B-H24 magnesium alloy in lap
configuration, Metallurgical
and Materials Transactions B, 2015, 46,
1626-1637.
N.Tahreen, D.F.Zhang, F.S.Pan,
X.Q.Jiang, D.Y.Li, D.L.Chen, Hot deformation and
processing map of an as-extruded Mg-Zn-Mn-Y alloy
containing I and W phases, Materials and Design,
2015,
87, 245-255.
J.Q.Zhang, A.K.Khan, O.A.Ojo,
N.Zhou, D.L.Chen, Analysis of microstructural
changes in the heat affected zone and
fusion zone of a fiber laser welded DP980 steel, Metallurgical and
Materials Transactions B, 2015, 46(4), 1638-1646.
W.F.Xu, J.H.Liu, D.L.Chen, Influence of test temperature on
the tensile properties along the thickness in a
friction
stir welded aluminum alloy, Journal
of Materials Science and Technology, 2015, 31(9), 953-961.
N.Tahreen, D.F.Zhang, F.S.Pan,
X.Q.Jiang, D.Y.Li, D.L.Chen, Hot
deformation and work hardening behavior of an
extruded Mg-Zn-Mn-Y alloy, Journal
of Materials Science and Technology,2015, 2015, 31,
1161-1170.
D.R.Ni, D.L.Chen, J.Yang, Z.Y.Ma,
Low cycle fatigue properties of friction stir
welded joints of a semi-solid processed AZ91D
magnesium alloy, Materials and Design,
2014, 56,
1-8.
S.Q.Wang, J.H.Liu, D.L.Chen,
Effect of strain rate and temperature on
strain hardening behavior of a dissimilar
joint between Ti-6Al-4V and Ti17 alloys, Materials
and Design, 2014, 56, 174-184.
D.Parkes,
D.Westerbaan, S.S.Nayak, Y.Zhou, F.Goodwin,
S.Bhole, D.L.Chen, Tensile properties of fiber
laser welded joints of high strength low alloy
and dual-phase steels at warm and low
temperatures, Materials
and Design, 2014,
56,
193-199.
N.Tahreen,
D.L.Chen, M.Nouri, D.Y.Li, Effects of
aluminum content and strain rate on strain
hardening behavior of cast magnesium alloys
during compression,Materials
Science and Engineering A, 2014, 594,
235-245.
V.K.Patel,
S.D.Bhole, D.L.Chen, Characterization of
ultrasonic spot welded joints of
Mg-to-galvanized and ungalvanized steel with a
tin interlayer, Journal of
Materials Processing Technology, 2014,
214(4), 811-817.
D.Sarker,
D.L.Chen, Dependence of compressive deformation
on pre-strain and loading direction in an
extruded magnesium alloy: texture, twinning and
de-twinning,Materials
Science and Engineering A, 2014, 596,
134-144.
D.Westerbaan,
D.Parkes, S.S.Nayak, D.L.Chen, E.Biro,
F.Goodwin, Y.Zhou, Effects of concavity on
tensile and fatigue properties in fiber laser
welding of automotive steels, Science
and Technology of Welding and Joining,
2014, 19(1), 60-68.
S.Q.Wang,
J.H.Liu, D.L.Chen, Influence of heat treatment
on fatigue resistance of electron beam welded
dissimilar titanium alloy joints, Advanced
Materials Research, 2014, 891-892,
1539-1544.
G.D.Wen, T.J.Ma,
W.Y.Li, J.L.Li, H.Z.Guo, D.L.Chen, Cyclic
deformation behavior of linear friction welded
Ti6Al4V joints, Materials Science
and Engineering A, 2014,
597, 408-414.
S.Q.Wang,
J.H.Liu, Z.X.Lu, D.L.Chen, Cyclic deformation of
dissimilar welded joints between Ti-6Al-4V and
Ti17 alloys: Effect of strain ratio, Materials Science and Engineering A, 2014, 598,
122-134.
Q.Chang,
C.P.Zhang, H.Q.Ru, J.L.Yang, D.L.Chen,
Hydroxyapatite reinforced with Ti-Fe particle:
correlation between composition, microstructure
and mechanical properties, Advances
in Applied Ceramics, 2014,
113(2), 108-113.
S.K.Shaha,
F.Czerwinski, W.Kasprzak, D.L.Chen, Work
hardening and texture during compression
deformation of the Al-Si-Cu-Mg alloy modified
with V, Zr and Ti, Journal of
Alloys and Compounds, 2014, 593,
290-299.
V.K.Patel,
S.D.Bhole, D.L.Chen, Ultrasonic spot welding of
aluminum to high strength low alloy steel:
Microstructure, tensile and fatigue properties,
Metallurgical and Materials
Transactions A, 2014, 45A,
2055-2066. (This paper
has been selected to be a “Highlighted Article”,
AM&P (Advanced Materials & Processes)
eNews, ASM-International, April 30, 2014).
D.Sarker,
J.Friedman, D.L.Chen, Influence
of pre-strain on de-twinning activity in an
extruded AM30 magnesium alloy, Materials
Science and Engineering A,2014, 605,
73-79.
Q.Chang,
H.Q.Ru, D.L.Chen, J.L.Yang, H.L.Shen, Effect of
iron on the sinterability and properties of
HA/Ti-Fe composites, Advanced
Materials Research, 2014, 898, 271-274.
S.K.Shaha,
F.Czerwinski, W.Kasprzak, D.L.Chen, Tensile and
compressive deformation behavior of the
Al-Si-Cu-Mg cast alloy with additions of Zr, V
and Ti, Materials and Design, 2014,
59, 352-358.
D.Sarker, D.L.Chen, The orientation
dependence of strain hardening and texture
development in an extruded magnesium alloy, Materials Science Forum, 2014,
783-786, 363-368.
R.Balasundaram,
V.K.Patel,
S.D.Bhole,
D.L.Chen,
Effect
of zinc interlayer on ultrasonic spot welded
aluminum-to-copper joints,
Materials
Science
and Engineering A,
2014,
607, 277-286.
V.K.Patel,
S.D.Bhole, D.L.Chen, Fatigue life estimation of
ultrasonic spot welded Mg alloy joints, Materials
and Design, 2014,
62, 124-132.
A.Macwan,
V.K.Patel, X.Q.Jiang, C.Li, S.D.Bhole, D.L.Chen,
Ultrasonic spot welding of Al/Mg/Al tri-layered
clad sheets, Materials and
Design, 2014, 62,
344-351.
D.Sarker, J.Friedman,
D.L.Chen, Influence of pre-deformation and
subsequent annealing on strain hardening and
anisotropy of AM30 magnesium alloy, Journal
of Alloys and Compounds, 2014, 611,
341-350.
D.R.Ni,
D.L.Chen, D.Wang, B.L.Xiao, Z.Y.Ma, Tensile
properties and strain-hardening behaviour of
friction stir welded SiCp/AA2009 composite
joints, Materials
Science and Engineering A,2014, 608,
1-10.
G.D.Wen, T.J.Ma,
W.Y.Li, S.Q.Wang, H.Z.Guo, D.L.Chen,
Strain-controlled fatigue properties of linear
friction welded dissimilar joints between
Ti-6Al-4V and Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloys,
Materials Science and Engineering A,
2014, 612,
80-88.
F.A.Mirza, D.L.Chen,
Fatigue of rare-earth containing magnesium
alloys: A review,Fatigue and
Fracture of Engineering Materials and
Structures, 2014, 37,
831-853 (Free
download here; selected to be "2017
FFEMS Most Cited Paper Award").
N.Tahreen,
D.F.Zhang, F.S.Pan, X.Q.Jiang, C.Li, D.Y.Li,
D.L.Chen, Influence of yttrium content on phase
formation and strain hardening behavior of
Mg-Zn-Mn magnesium alloy, Journal
of Alloys and Compounds, 2014, 615,
424-432.
